One of the biggest sources of entertainment is music to us. No matter we are upset or sad we love listening to music according to our moods. In that, the materials that help us to listen to music are very close to our heart. And if suddenly it doesn’t work while driving, routes suddenly become very long. Isn’t It? So in this article, we are going to discuss the reasons why is my aux not working in car. We will also provide you with some easy tips on how to fix it.
Table of Contents
Why Is My Aux Not Working In Car?
To fix the aux port you don’t need to ask for a mechanic and pay the cost to him you can fix the aux port by yourself. Provided that you have some knowledge of screwing and unscrewing.
- The port jack is a set of terminals connected to wires. When a plug gets inserted, the springs snap into place against the different conductors on the plug. If any one of these springs loses tension the connection will be unstable. Just holding or tilting the wire just adds enough of an angle to make the connection.
- Another problem can be that the terminals detach from the circuit board on their own and it takes to push the connection back together. Also, if any wires behind it are cut or worn then also it won’t connect.
- The problem can also be with the aux port so replace it. There are many aux port plug hub pieces that may fit in your car. Also, there can be debris at the aux port, using a cotton swab you can clean it. Make sure to keep the jack and the music system connections tight.
- Remember that the weakest part of the aux cable is the joint where the cord electrical wire is soldered to the connector. Constant slight bending of the cable every time you unplug will give a strain on the connector solder joint of your aux.
- Also many a time, the Aux doesn’t work perfectly because the connection is loose due to unusual use port expired and you need to replace and buy a new one.
How To Fix Aux Port In Your Car?
If something is wrong with the aux cable you can buy a new one. But if the aux port is not functioning properly then replacing it can be a bit tedious. So here are the things you need to do if Aux not working in car.
- Turn off the vehicle so that there is nothing electrical power on in the circuit of the car.
- Remove the stereo system and unscrew all the covers to check what is wrong with the port. Keep the springs on board and find whether the springs disconnect and after that reconnect them again. If all the springs are connected to their proper places then press it to make sure if anything loose can be fixed.
- Place it back into the port and test the AUX port. If still it’s not working then replace it with a new one or go to the mechanic to fix your port.
- For replacement, Place the new stereo model in your car and connect all the wires back. Check that all the processes you are doing very carefully. Because if by mistake one wire disconnects or damage you may lose your new audio system as well.
Better Options Than Aux Port
In the technology world, change is meant to be the only constant. One goes and the other better than that arrives. So, here are two options if your aux is not working in car, one in the wired and the other in the wireless section.
1. Bluetooth
Where AUX is a 3.5mm wired, limited within a range cable, Bluetooth is a wireless standard that allows more freedom of movement between a device and the host. For car audio, Bluetooth connections allow for hands-free with the help of virtual assistants. You can also connect calls using Bluetooth which is impossible using aux. However, the sound quality is also a bit different because Bluetooth only transfers compressed music due to which sound quality is a bit inferior. Damage to the wire will also not take place since it is wireless.
The only disadvantage or frustration for you can be the pairing process between two devices. Because software keeps on updating and outdated devices can be a challenge to connect. Some pairings may also require a passcode to complete the connection.
2. USB
If sound quality really matters a lot to you then there is also another option in case of wired for you, a USB. For wired connections, USB provides a better sound quality than aux as well as Bluetooth. Also, USB is safer and more convenient for driving.
Here there is no lossy conversion of audio. But you will not find a common USB port as compared to the aux one. USB can also be connected to external batteries, keyboards, or anything else. The primary work of an aux port is a music player. The primary work of a USB is the sharing of data between peripheral devices.
The easiest way to add USB to the car stereo is to connect an FM transmitter that has a built-in USB port but there is also another way that is our aux cable.
Conclusion
You can get help from a car mechanic to fix your aux port if your aux port is not working in car but if you want to save money then follow the above steps and fix it on your own. Drive without music can be very boring so check your port and cable whenever you plan to go for a long route.
Also, never inject the aux cable again and again due to which the aux cable can get loose. The radio system is connected with very small wires and the stereo is connected with tiny springs as mentioned above. So be gentle with your music system in the car.